Model SURFBUS-1 Surfer Bus Bed Frame
Revised 10/18/2017
Page
6 of 6
Step 4: Tighten all hardware. Make sure all assembled parts are tight and secure.
Step 3 - S: Fasten auxiliary side assemblies [A2] to side assemblies [A] using bolts [J] and nuts [K].
Use (1) washer [L] on each nut. Bolts shall face outward so that the smooth head is in. Side
assemblies pictured are for reference only; individual assembly types will vary with bed model. For
exact fit and style, refer to picture on cover of manual.
