Model POLCARL-1 Police Car Bed Frame
Revised 02/18/2019
Page
5 of 7
Step 1: Ensure there is enough room to lay out all parts. Carefully unpack all parts and hardware
and check that everything is present and undamaged. It is helpful to have more than one person
available for assembly.
Assembly Steps
Step 2: Loosely fasten side assemblies [A] to headboard [D] and footboard [D2] using lag bolts [E]
and flat washers [F], (4) lag bolt per side with a washer on each lag bolt. Do not yet fully tighten
hardware. Leave assemblies loose until after mattress support bars are laid in place.
