Assembly Steps
Step 1: Ensure there is enough room to lay out all parts. Carefully unpack all parts and hardware
and check that everything is present and undamaged. It is helpful to have more than one person
available for assembly.
Model EXCAVARM-1 Bed Frame Accessory
Revised 04/24/2017
Page
5 of 6
Step 2:
--Fasten sides [H] to front panel [E] and back panel [F] with lag screws [A] using (1) washer [B] on
each lag screw.
--Fasten bottom [G] to bottom of front panel and bottom of back panel using (1) screw [C] through
each predrilled hole in bottom panel.
