Revised 5-21-20 Copyright © 2020
P7200 Series Models:
No Blower 1200 CFM
P7236 P7236-
P7242 P7242-
P7248 P7248-
P7260 P7260-
P7272 P7272-
CONTENTS:
Part 1 - Planning The Installation
Part 2 - Electrical Connection
Part 3 - Direction of Vent and Securing The Hood
Part 4 - Use & Care
Before beginning installation, please thoroughly read and become familiar with these instructions. Installation and
service must be completed by a qualified installer. Failure to properly install this product may void the warranty.
Please be advised that the Trade-Wind
®
that does not have a roof over the BBQ Hood to protect it from direct rain or potential water ingress. This Hood
should be installed with a MINIMUM of three (3) f
protected from direct rain by an adjacent wall.
It is required that all duct work and roof openings be thoroughly sealed with the applicable tape and/or roof sealant
to prevent ingress of water.
Installer: Please leave Installation Instructions with the BBQ hood owner.
Owner: Please keep Installation Instructions for local electrical inspector’s use and for future reference.
WARNINGS:
Must be followed carefully to avoid
IMPORTANT:
Must be followed carefully to avoid damage or incorrect installation.
TIPS:
Contain helpful information to facilitate installation.
READ AND SAVE THESE INSTRUCTIONS
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO
PERSONS OBSERVE THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer. If you have any questions, please contact the
manufacturer at the address or telephone number listed in the warranty.
Copyright © 2020 Trade-Wind Manufacturing, LLC Proverbs 22:29
INSTALLATION INSTRUCTIONS &
USE & CARE GUIDE
Trade-Wind
®
P7200 Series BBQ Hood
P7200 Series Models:
0 CFM
-12
-12
-12
-23
-23
Direction of Vent and Securing The Hood
Before beginning installation, please thoroughly read and become familiar with these instructions. Installation and
service must be completed by a qualified installer. Failure to properly install this product may void the warranty.
®
P7200 Series BBQ Hood MAY NOT be installed on a Patio or Lanai area
that does not have a roof over the BBQ Hood to protect it from direct rain or potential water ingress. This Hood
should be installed with a MINIMUM of three (3) feet of weather proof roof coverage on all sides that are not
protected from direct rain by an adjacent wall.
It is required that all duct work and roof openings be thoroughly sealed with the applicable tape and/or roof sealant
Please leave Installation Instructions with the BBQ hood owner.
Please keep Installation Instructions for local electrical inspector’s use and for future reference.
Must be followed carefully to avoid personal injury.
Must be followed carefully to avoid damage or incorrect installation.
Contain helpful information to facilitate installation.
READ AND SAVE THESE INSTRUCTIONS
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO
PERSONS OBSERVE THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer. If you have any questions, please contact the
telephone number listed in the warranty.
Proverbs 22:29 Page
1
INSTALLATION INSTRUCTIONS &
USE & CARE GUIDE
P7200 Series BBQ Hood
Before beginning installation, please thoroughly read and become familiar with these instructions. Installation and
service must be completed by a qualified installer. Failure to properly install this product may void the warranty.
200 Series BBQ Hood MAY NOT be installed on a Patio or Lanai area
that does not have a roof over the BBQ Hood to protect it from direct rain or potential water ingress. This Hood
eet of weather proof roof coverage on all sides that are not
It is required that all duct work and roof openings be thoroughly sealed with the applicable tape and/or roof sealant
Please keep Installation Instructions for local electrical inspector’s use and for future reference.
Must be followed carefully to avoid damage or incorrect installation.
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO
a) Use this unit only in the manner intended by the manufacturer. If you have any questions, please contact the
