MultiSat Control Panel Owner’s Manual
47
Chapter 4 - Menu Functions
Manually Entering Latitude and Longitude
Follow the process shown in Figure 4-5 to manually enter your
vessel’s/vehicle’s latitude and longitude into the antenna. The
antenna will use your position information to speed up satellite
acquisition.
Figure 4-5 Entering Latitude and Longitude
Operations mode?
Yes
Next
Return
Get antenna status?
Yes
Next
Return
Control antenna?
Yes
Next
Return
Man control antenna?
Yes
Next
Return
Set Lat/Long?
Yes
Next
Return
Select Next until “Operations
mode?” is displayed.
<Default Display>
Menu
Install Satellite?
Yes Next Return
Latitude:
##N
-
Enter
+
Longitude: ###E
-
Enter
+
Latitude: ##N
Longitude: ####E
Select -/+ as
required to set
latitude and
longitude, then
select Enter.
Select Next until “Control
antenna?” is displayed.
Select Next Until “Set
Lat/Long?” is displayed.
Be sure to restart the antenna after entering a new latitude and
longitude. The antenna updates its stored position information
only upon restart. For details on restarting the antenna, see
“Restarting the Antenna” on page 50
IMPORTANT!
