MultiSat Control Panel Owner’s Manual
9
Chapter 2 - Installation
Inspecting Parts and Getting Tools
Before you begin, follow these steps to make sure you have everything
you need to complete the installation.
1.
Unpack the box and ensure it contains everything
shown on the
Kitpack Contents List
. Save the packaging
for future use.
2.
Carefully examine all of the supplied parts to ensure
nothing was damaged in shipment.
3.
Gather all of the tools and materials listed below. You
will need these items to complete the installation.
• Flat-head and Phillips-head screwdrivers
• 7/16" open-end wrench
• Electric drill
• #29 and 3/32" drill bits
• 3/16" nut driver/socket
• Light hammer and center punch
• Adhesive tape
• Scriber or pencil
• DIRECTV HD receiver and HDTV television (required
to receive DIRECTV’s HDTV programming)
• Power cable for connecting power to the MCP from the
TracVision system (see Figure 2-1)
Figure 2-1 Power Cable Guidelines
Cable Length
Use Cable Gauge
< 40 ft (12 m)
14AWG (2.5mm
2
)
40-70 ft (12-21 m)
12AWG (4mm
2
)
