If you have any questions about your model or its operation, call the TRACTION HOBBY Technical Support
Line at:86-0573-84639307/0573-84639306
You may also e-mail customer support with your question at [email protected].
TRACTION HOBBY offers a full-service, on-site repair facility to handle any of your TRACTION HOBBY
service needs. Maintenance and replacement parts may be purchased directly from TRACTION HOBBY
by phone. You can save time, along with shipping and handling costs, by purchasing replacement parts
from your local dealer.
Do not hesitate to contact us with any of your product support needs.We want you to be thoroughly satisfied
with your new model!
All of us at TRACTION HOBBY want you to safely enjoy your new model.Operate your model sensibly and
with care, and it will be exciting,safe, and fun for you and those around you. Failure to operate your model
in a safe and responsible manner may result in property damage and serious injury. The precautions
outlined in this manual should be strictly followed to help ensure safe operation. You alone must see that
the instructions are followed and the precautions are adhered to.
1.Your model is not intended for use on public roads or congested areas where its operation can conflict with
or disrupt pedestrian or vehicular traffic.
2.Never, under any circumstances, operate the model in crowds of people. Your model could cause injury if
allowed to collide with anyone.
3.Because your model is controlled by radio, it is subject to radio interference from many sources that are
beyond your control.Since radio interference can cause momentary losses of radio control, always allow a
safety margin in all directions around the model in order to prevent collisions.
4.The motor, battery, and speed control can become hot during use.Be careful to avoid getting burned.
5.Don’t operate your model at night, or anytime your line of sight to the model may be obstructed or impaired
in any way.
Your model’s electronic speed control (ESC) is an extremely powerful electronic device capable of delivering
high current.
Please closely follow these precautions to prevent damage to the speed control or other components.
1.Disconnect the Battery: Always disconnect the battery from the speed control when not in use.
2.Insulate the Wires: Always insulate exposed wiring with heat shrink tubing to prevent short circuits.
3.2-4 LiPo cells (2S): The ESC can accept a maximum input voltage of 14.8 volts (4S LiPo).Always adhere
to the minimum and maximum limitations of the ESC as stated in the specifications table.
4.Transmitter on First: Switch on your transmitter first before switching on the speed control to prevent
runaways and erratic performance.
5.Don’t Get Burned: The ESC and motor can become extremely hot during use, so be careful not to touch
them until they cool. Supply adequate airflow for cooling.
6.No Reverse Voltage: The ESC is not protected against reverse polarity voltage.
