BCS Snow Blower Attachment
Page 4
TWT/BLWR/0617
Operation
Before using this product read these instructions carefully.
Make sure the snow blower is mounted and fixed properly to the power unit.
If in doubt contact Tracmaster on 01444 247689.
Always wear gloves.
Before commencing work, check that the snow
blower auger turns regularly.
Best results are obtained with the engine at a high
throttle setting.
Never put your hands into the chute - stop the
engine first and use the stick provided to clear the
chute.
Do not direct the discharge chute towards people
or objects.
Do not use the machine with damaged or
disconnected guards and/or safety devices.
Use the skid shoes to adjust the operating height of
the snow blower - the blade (A) must be mounted
in such a way as to skim the ground. If the surface
is uneven or gravel/stones are present, the blade
should be raised.
Remove pin (B), lower skid shoe (C) and reinstall pin
(B) in a lower hole (see fig 1).
Turn the discharge chute by turning the control rod
in the direction the snow is to be thrown (fig 2).
fig 2
fig 1
