Local Testing:
Spinning the anemometer cup assembly will produce a series of pulses. To verify sensor output, monitor
this signal with either a translator module, data logger or an ohmmeter.
Caution
Do not Open the sensor bottom. This can permanently damage the sensor
and void warranty.
Guidelines for Securing Cables
•
To prevent fraying or cutting of cables, secure them so they will not whip about in the wind.
•
Secure cable to a metal pole using cable ties or by wrapping tape around both the cables and the pole.
•
Place clips or ties every 3' – 5' (1 – 1.6 m).
Example Installations