Enduro Plus CDMA User Manual
For More Information: Please contact TrackingTheWorld, 1633 Bayshore Highway, Suite 390, Burlingame, CA. 94010, USA
Phone: +1.650.692.8100 – Email:
– Website:
www.trackingtheworld.com
Copyright © TrackingTheWorld. All rights reserved. Information in this publication supersedes that in all previously published material. Specification and price
change privileges reserved. All trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies.
TTW-EnduroPlusCDMA-UM001
- 7 -
2.3.
LEDs Description
There are three LED in ENDURO PLUS CDMA, the description as following.
2.4.
External Power Interface
2.4.1.
2.4.1 External DC Charger Interface
The Pin2 on Mini-USB connector are used for charging and named as VCHG pin, It can be connected to a
5V DC power supply to power ENDURO PLUS CDMA and charge the internal battery.
LED
Event
State
CELL LED
Searching network
Fast flash
Network has been registered
Slow flash
Power off
Dark
<LED on> is 2
Dark
GPS LED
GPS has fixed
Solid
GPS is in fixing
Fast flash
GPS is on and GPS data wrong
Slow flash
GPS is off
Dark
If <LED on> is 0, 150 seconds later after powers on. Dark
<LED on> is 2
Dark
PWR LED
Power on and normal
Dark
Charger inserted and charging completed
Solid
Charger inserted and charging
Fast flash
Power key was pressed and prepare to power off
Fast flash
Abnormal
Fast flash
Power low alert
Slow flash
Power off or turn off the power light by command Dark
<LED on> is 2
Dark
