8 EN
Package contents / product parts:
Gerätebeschreibung:
1. USB-C charging port
2. Power button
3. SIM card slot
4. LED
5. Rubber plug
6. Magnet with light sensor
Package Contents:
- trackilive TL-50 4G
- USB-C cable
- User manual
General information
These operating instructions are for Trackilive TL-50 4G Tracker, which
will simply be referred to as ‘tracker’ in the following. They contain
important information regarding set-up and operation. Before using the
tracker, please read the operating instructions carefully. This particularly
applies to the safety notes. Failure to adhere to these operating instruc-
tions may result in severe injury or damage to the tracker.
The operating instructions are based on the standards and rules in force in the Euro-
pean Union. When abroad, you must also observe country-specific guidelines and laws.
Keep the operating instructions for future use. If you pass the tracker on to third parties,
please make sure, to include these operating instructions.
Initial set-up
Charging Battery
When you unpack the tracker for the first time, the battery is probably empty. Battery
need to be charged a few times to reach full capacity!
Charge it as follows:
1. Open the rubber plug located on the side of the device, connect charging cable to
the tracker charging port.
2. Connect the other end of the charging cable to the USB power adaptor and then to
the power socket.
3. Charge the tracker for a few hours. The red light will turn on whilst charging and it
will go off once the tracker is fully charged.
4. Disconnect tracker from the charging cable.
