Replacing the Battery:
1) Slide the entire keypad up. You will feel it “pop” loose.
2) Carfully pull the keypad away from the safe. Take care of the
wires.
3) Carefully disconnect the 9-volt battery from the terminals by
unsnapping the terminal connector located on top of the battery.
CAUTION: DO NOT PULL BATTERY LEADS/WIRES OUT
OF THE HOUSING!
4) Connect a new 9-volt alkaline battery with a “use date” of at
least 5 years in the future.
(Recommended brands: Duracell™, Energizer™, Eveready™)
5) Push the battery and the wire leads completely into the
compartment.
CAUTION: BE VERY CAREFULL NOT TO PINCH THE
BATTERY LEADS.
6) Carefully position the keypad over the two mounting screws and
slide the keypad down until you feel a “pop”. Be careful that
there are no wires pinched between the keypad and the safe.
CAUTION: BE CAREFUL NOT TO PINCH THE WIRES.
Low Battery Warning:
Repeated LED flashing and beeping during an opening indicates
that the battery is low and needs immediate replacement.
Wrong Try Lock Out Period:
Four (4) consecutive invalid combinations starts a five (5) minute
lock out period. The LED light will flashes red at ten (10) second
intervals. At the end of the lock out period, two (2) more invalid
combinations will restart the five (5) minute lock out period.
6
Operating the electronic Lock
