Tracker Hunter Tracker G400, Manual, Page: 39 / 136

39
Changing the collar
1. Placing the antenna socket
Place the antenna socket to its slot
4 4 . . 1 1
on the cover.
2. Placing the collar
Place the collar on the cover so that the antenna holder 5
5
.
.
1
1
fits in the hole in the collar.
3. Attaching the collar holder
The collar holder has numbers on the backside. Place the holder 6
6
.
.
1
1
on the collar so that the numbers (1 and
2) match the numbers in the cover. Make sure that the hole in the collar is in its place. Carefully screw in the
four torx screws
6
6
.
.
2
2
. Tighten the screws with sufficient power (max moment 25 cNm). NOTE! Do not screw
too tight, because the screw inserts may come loose.
4.1
5.1
6.2
6.1