Track Loader Parts Terex PT30CE, Operation And Maintenance Manual

Page: 55 / 85

5 OPERATION
54
5.13 Lift Arm Brace
When the lift arms must be
left in the raised position, the
lift arm brace must be
engaged.
To engage:
1.
Lower the lift arms,
remove any attachments
and park the machine on
firm and level ground.
2. Remove the pin that
secures the brace to the
fender.
3. Wrap the spring around
the cylinder and attach it
to the other side of the
brace (fig. 5.13-1).
4. Raise the lift arms until
the brace contacts the
cylinder rod (fig. 5.13-2).
5. Slowly lower lift arms until the lift arms come to rest (stop) on
the brace.
6. Shut the engine off and exit the machine.
To disengage:
1.
Remove the spring from the cylinder.
2. Raise the lift arms until the brace falls away from the cylinder
rod.
3. Lower lift arms.
4. Turn the engine off.
5. It is now safe to exit the machine and re-attach the brace to
fender.
5.13-1
5.13-2
Do not go beneath unsecured lift arms. Always install the lift
arm brace prior to going beneath the lift arms while raised.