EN
RGB Car Atmosphere Light TRACER
Instruction manual
Please read and retain for future reference the following carefully to ensure the
satisfactory and safe operation of the light.
Note:
• Before the first use, remove all packaging elements.
• Unwind and straighten the USB cable before use.
• Make sure that the cable has no visible damage.
• Make sure that the cable is not stretched over an open flame or other heat
source that may damage the cable insulation.
• The cable must be positioned so as not to present a risk of tripping or
entanglement
• This product is not a toy. Make sure children are supervised and do not play with
the product
• This device is not intended for use by persons (including young children)
with reduced physical, sensory or mental abilities or without experience and
knowledge, unless they are supervised or instructed in the use of the device by
a person responsible for their safety.
1. Package includes:
4 RGB strips with cables, car adapter, instruction manual
2. Product description and installation
4 RGB LED strips, powered by a car adapter. The device is controlled via the BT
app. Application name: ”duoCo Strip”
2.1. Remove the strips from the packaging
2.2. We suggest mounting two shorter ones at the front of the car, under the
dashboard, and two on longer cables, under the front seats, so the back of
the car will be illuminated as well.
2.3. Attach the strips to the flat surface by peeling off the adhesive tapes firstly –
attention: after mounting the strips it will be difficult to tear them off - after they
are taken off, they will not be suitable for mounting elsewhere on the same
tapes
2.4. Plug the adapter into the car socket
2.5. Press the red button „PUSH ON”
3.Operating the app.
3.1 Download the duoCo Strip application
by entering the name or scanning
the QR code
3.2. Check if the Bluetooth function is enabled on your smartphone. BT must be
turned on for the application to work.
3.3. Open App: Allow the app to download your location while using your device
• Press 3 lines icon in the upper left corner of the application, the device should
appear in the application, click on it to connect the application
• Re-enter the main screen, make sure the „on / off” button is on.
• Manage the application. See below the description of the home screen functions.
• At the bottom of the main screen there are 5 icons:
Adjust
- it is a main screen
Style
- 29 illumination modes. By swiping up or down you can choose different
mode
Music
- the Leds will illuminate according to the music played from your
smartphone. The music saved on your smartphone memory should automatically
be displayed on the list
Mic
- microphone. The LEDs will illuminate according to the tones of surroundings
like voice or music
Schedule
- you can set here the days and time when the strip will turn on
automatically. There are 2 buttons in this application window: „Schedule On” and
„Schedule Off”, which should be set to the ON position. Under each button you
have „Time” - after clicking on the icon, you can set the appropriate time to turn the
LEDs on and off. Under the „Time” icon you will find „Repeat” icon and the days
listed from Monday to Sunday. After selecting the time and day of switching on / off
- the strips will automatically switch on and off on the selected days and time. The
color of the light will be same as the one selected on the main screen.
4. Switching the strips with the button located on the car power supply.
After pressing the „Push ON” red button, the strip will turn on and off when
the button is pressed again. The light colour will be remembered as it was last
selected on the application.
Note:
Ingress Protection: 44 - product withstands splashes from any direction, making it
splashproof
Safe use instruction
1. Do not cover the LEDs with any objects.
2. Do not pull the power cord
3. Be careful with hot surfaces
4. Do not stare at the light source
5. Do not touch with wet hands
6. Do not throw it
7. The product is not a toy
Parameters:
Material: plastic and silicone
Bluetooth: BLE V4.2
Supply voltage: DC 5V
Max power: 12 W
Diodes quantity: 48 RGB (4x12)
The length of each LED strip: 22 cm
The width of each LED strip: 1.3 cm
Length of the shorter cables (2): 110 cm
Length of longer cables (2): 160 cm
Product disposal:
1. Packaging components in the form of paper, cardboard and similar materials
should be transferred to waste paper or thrown into waste containers intended
for paper
2. Plastic elements such as polystyrene, films, granular fillers and similar should
be thrown into containers intended for plastics
Click to show the
lamp list
Switch the color
wheel
Click square
icon to adjust
the color
Click to display setting view
Lamp switch button
Adjust the color
Working time schedule
Display the RGB
value click to manual
adjustment view
The symbol of the crossed-out garbage bin placed on the equipment, packaging
or accompanying documents means that the product may not be thrown out toge-
ther with other waste. Used equipment may contain substances having toxic and
carcinogenic properties, hazardous to human health and life, and poisoning the
soil and groundwater. It is the user’s responsibility to hand over the waste equipment to
a designated collection point for its proper processing. For more information on recycling
of devices, please contact your local authorities, the waste disposal service and the place
where you purchased this product.
Hereby, Megabajt Sp. z o.o. declares that the radio equipment type RGB Car
Atmosphere Light TRACER is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following internet adress:
www.tracer.eu/ TRAOSW46896
Producent: Megabajt Sp. z o.o., ul. Rydygiera 8, 01-793 Warszawa