
Setup:
Assemble the device according to the scheme before first use. Make sure the control panel is ex
-
actly placed on the bin. Make sure the bin is attached and that it can be detached with ease.
Place the shredder in a stable position on the ground.
Plug the power cord into any standard 220-240 volt AC outlet.
Operating the shredder:
The Main Switch is located on the top of the shredder (control panel).
When AUTO is selected, the shredding process is started automatically by inserting the paper, a
disk or a credit card into the feed opening. When inserting papers, please do not shred CD/DVD
and credit card at the same time. When inserting CD/DVD and credit card, also please do not shred
paper at that time. The shredder will stop automatically when the paper, a disk or a credit card has
completed its travel through the feed opening.
REV is used to assist in the removal of a paper jam, which reverses the shredder process prior to a
completed cycle, thus clearing the cutters.
FWD is used to get rid of clogged lements in the entry.
OFF is used to terminated the power to the shredder.
Shredder capacity:
Tracer Opencut will shred ten (10) sheets of A4 size 80g/m
2
paper, a CD/DVD disk or credit card at
once and will accept paper widths up to 220mm. When shredding small material like envelopes or
receipts, insert them through the middle of the feed opening.
1
8
9
4 5 6 7
3
2
Instructions
for use
6
Tracer Opencut
paper shredder
EN