©2018 Traceable
®
Products. 92-6535-00 Rev. 0 013118
TRACEABLEGO
DATALOGGER
INSTRUCTIONS
®
Traceable
®
is a registered trademark of Cole-Parmer.
Cat. No. 6535, 6537
2.
If device’s START Mode is confi gured as
PUSH
BUTTON TO START
(default), device LCD
displays ‘push to start’ (Figure 4). Press and hold
START/STOP
until LCD symbol appears. Device
enters RUN Mode. If device’s START Mode is
confi gured as IMMEDIATE START, device enters
RUN Mode immediately. If device’s START Mode
is confi gured as DELAYED TIME START, delayed
start time set by user is counting down on device
LCD. Once the counting time reaches 0, device
enters RUN Mode.
_____________________________________________________________________________________
Page
7
of
10
Figure
6
3) If device in
RUN Mode
, LCD symbol
appears, and device logs data at user-
defined interval.
If device’s STOP Mode is configured as PUSH BUTTON TO STOP, p
ress
and hold
until LCD symbol
appears. Device enters STOP Mode.
If device’s
STOP Mode is configured as NEVER STOP, device will ignore the button press, and
device will stop when memory is full if Memory Mode is set to STOP WHEN FULL, or
device will stop when APP is connected to device and start to download data.
4) If device in STOP Mode, press and hold
until LCD symbol
appears. Device
enters RUN Mode, and resumes to log data at current setting. Every time device
resumes to log data from STOP Mode, Min/Max values are reset.
Note: The combination of Wrap When Full Memory Mode and NEVER STOP Stop Mode
cannot happen because the device will never stop in this combination. APP
prevents such combination to happen.
Note: If device in STOP Mode, START Mode will be set to PUSH BUTTON TO START
regardless of previous Start Mode Setting. If Delayed Start Mode is needed while
device in STOP Mode, device must be re-configured.
Note: While device is connected to APP, once Device has received command from APP to
upload data to APP, device will stop logging data and enter STOP Mode if it is still
in RUN mode.
Note: All data stored in %RH, Celsius
20.Clear Device Internal Data Memory Storage
1) Data points stored in device internal storage can only be cleared through APP.
2) Each time device is configured, all stored data points will be cleared.
3) Run Time/Alarm Time are also reset.
21.Download Data
1) If device is not in STOP Mode, press and hold
for 3 seconds until LCD symbol
appears. Device enters STOP Mode;
Or
3. If in
RUN Mode
, LCD symbol
RUN
appears, and
logs data at user-defi ned interval. If STOP Mode
is confi gured as PUSH BUTTON TO STOP, press
and hold
START/STOP
until LCD symbol
STOP
appears. Device enters STOP Mode. If STOP
Mode is confi gured as NEVER STOP, device will
ignore button press, and will stop when memory is
full if Memory Mode is set to STOP WHEN FULL,
or will stop when TraceableGO™ App is connected
to device and downloads the data.
4. If in STOP Mode, press and hold
START/STOP
until LCD symbol
RUN
appears. Device enters
RUN Mode and resumes to log data at current
setting. Anytime device resumes to log data from
STOP Mode, Min/Max values are reset.
Note:
If device in STOP Mode, START Mode will
be set to PUSH BUTTON TO START regardless of
previous Start Mode Setting. If Delayed Start Mode is
needed while device in STOP Mode, device must be
re-confi gured.
Note:
While device is connected to TraceableGO™
App, once Device has received command from App to
upload data to App, device will stop logging data and
enter STOP Mode if it is still in RUN mode.
CLEAR DATA MEMORY STORAGE
1. Data points stored in device internal storage can
only be cleared through TraceableGO™ App.
2.
Each time device is confi gured, all stored data
points will be cleared.
3. Run Time/Alarm Time are also reset.
DOWNLOAD DATA
1. If device is not in STOP Mode, press and hold
START/STOP
for 3 seconds until LCD symbol
appears. Device enters STOP Mode
-OR-
If Stop Mode is set to NEVER STOP and Memory
Mode is set to STOP WHEN FULL and device is in
RUN Mode, skip Step (1).
2. Quick press
START/STOP
twice to enable
Bluetooth, and Bluetooth LCD symbol appears.
Device starts to advertise.
3. Connects to device through TraceableGO™
App. Once connected, device LCD displays ‘ble
connect’:
_____________________________________________________________________________________
Page
8
of
10
if Stop Mode is set to
NEVER STOP
, and Memory Mode is set to STOP WHEN FULL and
device is in RUN Mode, skip Step (1);
2)
Quick press
twice to enable Bluetooth, and Bluetooth LCD symbol
appears.
Device starts to advertise;
3)
Connects to device through APP. Once connected, de
vice LCD displays ‘ble connect’
(Figure 6);
Figure
7
4)
Follow APP’s instruction on how to download data from device. While data
downloading
is in process, device LCD displays ‘dat upload
_
’
(Figure 7);
Figure
8
5)
Once download process is complete, de
vice LCD displays ‘ble connect’.
6)
User can view, export data through APP.
Note: Full memory data downloading takes as less as 5 minutes to complete. The actual
downloading time varies on how data logged, mobile device type, and distance
between device and mobile device.
Bluetooth Connection Interval Full Memory Data Upload Duration
7.5 ms 4.9 min
15 ms 7.2 min
30 ms 10.5 min
22.
Display firmware version:
1) Quick press
3 times;
2) Device displays Firmware Revision
❶
, CPU Restart Cause
❷
, Last Error Code
❸
(00
00 means no error).
4.
Follow TraceableGO™ App instruction on how
to download data from device. While data
downloading is in process, device LCD displays
‘dat upload_’:
_____________________________________________________________________________________
Page
8
of
10
if Stop Mode is set to
NEVER STOP
, and Memory Mode is set to STOP WHEN FULL and
device is in RUN Mode, skip Step (1);
2)
Quick press
twice to enable Bluetooth, and Bluetooth LCD symbol
appears.
Device starts to advertise;
3)
Connects to device through APP. Once connected, de
vice LCD displays ‘ble connect’
(Figure 6);
Figure
7
4)
Follow APP’s instruction on how to download data from device. While data
downloading
is in process, device LCD displays ‘dat upload
_
’
(Figure 7);
Figure
8
5)
Once download process is complete, de
vice LCD displays ‘ble connect’.
6)
User can view, export data through APP.
Note: Full memory data downloading takes as less as 5 minutes to complete. The actual
downloading time varies on how data logged, mobile device type, and distance
between device and mobile device.
Bluetooth Connection Interval Full Memory Data Upload Duration
7.5 ms 4.9 min
15 ms 7.2 min
30 ms 10.5 min
22.
Display firmware version:
1) Quick press
3 times;
2) Device displays Firmware Revision
❶
, CPU Restart Cause
❷
, Last Error Code
❸
(00
00 means no error).
5. Once download process is complete, device LCD
displays ‘ble connect’.
6. User can view, export data through TraceableGO™
App.
Note:
Full memory data downloading takes as little as
5 minutes to complete. The actual downloading time
varies on how data logged, mobile device type, and
distance between device and mobile device.
WARRANTY, SERVICE, OR RECALIBRATION
For warranty, service, or recalibration, contact:
TRACEABLE® PRODUCTS
12554 Old Galveston Rd. Suite B230
Webster, Texas 77598 USA
Ph. 281 482-1714 • Fax 281 482-9448
E-mail [email protected] • www.traceable.com
Traceable
®
Products is ISO 9001:2008 Quality-
Certifi ed by DNV and ISO/IEC 17025:2005
accredited as a Calibration Laboratory by A2LA.
