Trace2o UV Digester HMUV1825P
Instruction Manual v3.0
9. POWER PACK
IMPORTANT INFORMATION FOR YOUR SAFETY
DO NOT SHORT CIRCUIT OR TAMPER WITH THIS UNIT. ALWAYS OBSERVE
CORRECT POLARITY AND SYSTEM VOLTAGE WHEN CONNECTING.
Failure to do so may lead to a HAZARDOUS situation, damage the pack or
equipment and may invalidate the warranty. Remove personal items such as
rings, bracelets and watches when working with batteries.
WARNING
Before initial use, the 230V AC portable power pack
must
be put on charge
overnight (16Hrs). Failure to do so may reduce the life of the product and
invalidate the warranty.
DESCRIPTION
This 100W Portable Power Unit provides a versatile and complete power
solution that is safe and easy to use. The power unit is fitted with one, high
performance, 12V 12Ah lead-acid battery. It gives one output available on the
outside of the unit, that is capable of powering loads up to 100W overall
(depending on temperature of operation). Also incorporated is a 'low voltage
disconnect' system, which prevents damage to the batteries due to over
discharge.
OPERATION
BEFORE OPERATING THIS EQUIPMENT READ ALL OPERATING
INSTRUCTIONS THOROUGHLY
FOR 230V AC OUTPUT:
1. Ensure the unit is turned ‘OFF’
2. Connect an AC output lead to the ‘230V AC OUTPUT’ output
3. Connect the lead assembly to the equipment
4. Press the ‘ON’ button of the unit (internally)
5. The ‘SYSTEM POWER’ LED should illuminate
In this state, the battery voltage is continually monitored. When the battery
voltage falls below approximately 10.6V, the 230V AC output will turn off to
protect the batteries from becoming over discharged
