Copyright
Trace Engineering Co., Inc.
Telephone (360) 435-8826
Part Number 3471
5916 195th Street, NE
Fax (360) 435-2229
Released: Thursday, April 29, 1999
Arlington, WA 98223 USA
5-16
PMO-DCBB/Kit/(SW)(DR)
PMO-DCBB/Kit/(SW)(DR)
All DC negative ground cables are attached to this
ground bus. Battery ground cables must be routed
through the shunt in order to enable accurate current
reporting by the inverters. Connect inverter DC
negative cables to the bottom of the DCBB, shown in
the photo above with a DC175/250 installed. Connect a
bare ground conductor from the bottom of the DCBB to
a copper or iron rod driven into the ground to form a
ground rod.
#
Qty
Part No.
Description
1
1
3017
lock, washer 3/8” SS split ring
2
3
3016
bolt, 3/8-16 x ¾” SS HH
3
2
442
nut, 10-32
SS
4
2
486
star washer, #10 internal tooth SS
5
1
2377-1
shunt, 500v/50mA for PVGFP
6
2
486
star washer, #10 internal tooth SS
7
2
2845
machine screw, 10-32 x ¾” HH SS
8
5
2997
buss bars for shunt
9
2
3362
machine screw, 10-32 x 3/8” HH SS
10
2
486
star washer, #10 internal tooth SS
11
2
2147
star washer, external tooth ¼” SS
DCBB shown with DC175/250 installed
