Instruction
manual
10
EN
Tracer M4TS FHD Orion
G-Sensor
It is one of the most important functions of a car camera. It is a sensor that evaluates
all the forces that act on the car while driving and maneuvering on the road, and as
a result of road incidents. In a situation where the forces detected by the sensor are
higher than those in normal use, sensor sends a signal to the camera and blocks
the recorded video from being deleted. For example, in the event of a collision by
another car, or a collision while parking, the G-Sensor’s response automatically sa
-
ves and blocks the recording. Thanks to this function, we have irrefutable evidence
of who was at fault on the road and what were the circumstances of the event, and
thus may be used as possible evidence in a case for compensation or proving guilt.
Parking mode
Thanks to this function, when the car is parked in the parking lot, the engine is not
turned on and the camera is powered by the built-in battery, any movement of the
car will save the recording and prevent it from being deleted. Thanks to this, we
have documentation of what happened.
Recording
DVR will automatically enter into default recording mode when car starts. The re
-
cording file is saved in the Micro SD (TF) card in the folder DCMIA file folder. When
car stops and the engine it turned OFF camera will stop recording automatically
and will save the latest video.
Recording setting:
After entering into recording mode, press the setting icon to enter into recording settings:
•
Resolution: 1080P/720P/480P
•
Dual: Off/On
•
Cycle: Off/1Min/3Min/5Min
•
Exposure: -3 to +3
•
Motion: Off/On
•
Watermark: Off/On
•
Gravity/G-sensor: ON/OFF
•
Sound: Off/On
•
Guard: Off/On
•
License: Off/On
Playback Mode
Using the Playback icon on the touch panel enter into Playback mode. Then can
preview or delete the files.