6
CAUTION!!!!
SPINNING BLADE
MAINTENANCE SCHEDULE
Check engine oil level
Check tire pressure
Check all hardware for tightness
Lubricate
Clean
Maintain engine per engine manual
Bef
or
e eac
h
us
e
Aft
er
each
u
se
Ever
y sea
so
n
Before Stoarage
Service Dates
X
X
X
X
X
X
MAINTENANCE
DANGER: The Trac-Vac was built to be operated according to the rules for safe operation
in this manual. Carelessness or error on the part of the operator can result in serious
injury. This unit is capable of amputating fingers or hands and throwing objects. Failure to
comply with the safety instructions could result in serious injury or death.
BEFORE EACH USE
CHECK FOR LOOSE HARDWARE
▪ Make a thorough visual check of the unit for any bolts and nuts which may have become loose.
Retighten any loose nuts and bolts
CHECK TIRE PRESSURE
▪ Check tire pressure regularly. The recommended tire pressure is printed on the tire.
CHECK ENGINE OIL LEVEL
▪ Check oil level before each use. Maintain engine oil as instructed in engine manual.
LUBRICATION
▪ Use a light machine oil to lubricate the axle where the hitch tongue pivots and the latch and
pivot bolt at the beginning of each season.
▪ Grease or oil wheel bearings, using automotive wheel bearing grease at least once every season.
WARNING:
Always stop engine and disconnect spark plug wire before
lubricating, cleaning or before maintenance or repairs.
ENGINE MAINTENANCE
▪Check oil level before each use, maintain engine oil according to the engine manual
▪Service air cleaner after every 25 hours of normal conditions. Under extremely dusty
conditions, clean every few hours. Poor engine performance usually indicates that the air
cleaner needs to be serviced.
▪Clean spark plug and reset gap once every season. It is recommended that the spark plug be
replaced at the start of each season. Check the engine manual for the correct spark plug and gap
specifications.
CLEANING
▪ Clean the unit after each use. Grass clippings and leaves can mildew and cause damage if
not properly cleaned.
▪ Clean the engine regularly with a cloth or brush. Remove all dirt and debris from muffler area.
Summary of Contents for 565CKG
Page 8: ...7 NOTES...
