Parameterization and configuration
TR-Electronic GmbH 2011, All Rights Reserved
Printed in the Federal Republic of Germany
Page 106 of 139
TR - ELE - BA - DGB - 0022 - 04
02/08/2016
8.1 Overview
Configuration Operating parameters
*
Length
Features
TR-Mode
- Resolution
- Count direction
- Offset
- Offset value
- Measuring cycle
- Error output
- Error output value
32 Bit IN
32 Bit OUT
- Output of the current actual position with the
adjusted resolution, counting direction and
sample rate
- Preset adjustment via the bus
- Failure handling
TR-Mode
extended
Page 110
- Resolution
- Count direction
- Offset
- Offset value
- Measuring cycle
- Error output
- Error output value
- Digital Input Output 1
- Digital Output 1 ON/OFF
- Digital Output 2 ON/OFF
- Analogue output min/max
- Min current
- Error indicating current
32 Bit IN
32 Bit OUT
- Output of the current actual position with the
adjusted resolution, counting direction and
sample rate
- Preset adjustment via the bus
- Failure handling
- Configuration Digital Input / Output
- Configuration of the switching points,
Digital Outputs
- Configuration Analog Output
- Failure handling, Analog Output
*
from the bus master perspective
