Parameterization
TR-Electronic GmbH 2013, All Rights Reserved
Printed in the Federal Republic of Germany
Page 130 of 171
TR - ECE - BA - DGB - 0102 - 03
09/23/2014
8.4.3.12 Attribute 23, Position High Limit
Position High Limit
defines the maximum value of the work area.
The value must be within the measuring range and over the „
Position Low
Limit
“.
DINT
Position High Limit
Byte 0
Byte 1
Byte 2
Byte 3
2
7
up to 2
0
2
15
up to 2
8
2
23
up to 2
16
2
31
up to 2
24
Connection path,
Packed EPATH
with 8 bit class
0x20
0x23
0x24
0x01
0x30
0x17
Logical Type
= Class
Class #23
Logical Type
= Instance
Instance #1
Logical Type
=Attr.-ID
Attr.-ID #23
To save this attribute permanently the attribute 112
Accept Parameter
or service
code 0x16
save
must be executed.
8.4.3.13 Attribute 24, Velocity Value
Velocity Value
returns the velocity signed as a complement of two. In default
setting the velocity is output in revolutions per minute.
Count direction = increasing
- Positive output at count direction clockwise (with view on the flange)
Count direction = decreasing
- Negative output at count direction clockwise (with view on the flange)
DINT, read only
Velocity
Byte 0
Byte 1
Byte 2
Byte 3
2
7
up to 2
0
2
15
up to 2
8
2
23
up to 2
16
2
31
up to 2
24
Connection path,
Packed EPATH
with 8 bit class
0x20
0x23
0x24
0x01
0x30
0x18
Logical Type
= Class
Class #23
Logical Type
= Instance
Instance #1
Logical Type
=Attr.-ID
Attr.-ID #24
