TQC SP7316, Manual

Page: 11 / 17

1 |
TQC SURFACE PROFILE AND COATING THICKNESS GAUGE
SP1560
1 PRODUCT DESCRIPTION
The TQC Surface Profile & Coating Thickness gauge is a combination gauge. that can be
equipped with two different tips, one for surface roughness and another for coating
thickness.
1.1 Technical Specifications
Range : 0~3,4 mm / 0~0.13 inch
Resolution : 1
µ
m / 0.04 mil
Accuracy : ± 5
µ
m / 0.2 mil
Thread : M2.5 x 0,45
Stem Diameter : 8 mm / 0.3 inch
Battery
: Type LR44 1.5 V
1.2 Details
Tips: : Sharp needle tip for Surface Roughness gauge (standard on the gauge)
: Round tip for Coating Thickness Gauge
2 STANDARDS
ISO 2808-4B, ASTM D 4417-B, JIS K 5600-1-7, BS 3900-C5
Look up the appropriate standard for a correct execution of the test
3 WHAT’S IN THE BOX?
The instrument comes with two tips and a glass calibration plate, all in a leather pouch.
4 SPARES / ACCESSORIES
SP1619 Replacement tip for coating thickness
SP1616 Replacement tip for roughness
SP1618 Spare leather pouch for SP1560
5 PERFORM A MEASUREMENT
5.1 Measuring Roughness
1. Press the On/Off button to switch the gauge on.
2. Check if the right tip is chosen. (the sharp needle tip is suitable for measuring roughness)
3. Choose parameter by pressing the IN/MM button.
4. Place the needle of the gauge on the flat glass specimen (zero plate) and press the gauge with the
holder down until the base of the holder stands firmly on the zero plate.
5. Press the ZERO button to make the instrument read zero.