9 |
4.5 Switching off the Microscope
1. Fold the display panel and then the microscope will switch off automatically
2. Press ON/OFF button
3. By Power Save. Please refer to Section 5.2.2 for Power Save setup.
4.6 Capture an image
1. Switch on the microscope by simply unfolding the display panel
to a proper position, normally at an angle of 90 degrees with the
viewing end as follows:
2. Adjust the LED brightness dial to get a proper brightness of the
LEDs at the microscope’s viewing end.
3. Hold the microscope main body by right hand; put the viewing
end closely to target object; adjust focus wheel to get clear image
with left hand.
4. When a clear image is displayed, hold the microscope steadily
and press Capture button (1) once.
6/26