automatic-film-applicator-ab3120-m44 - Page 13 of 23
13 |
NOTE: The length of TQC Spiral bar coaters has changed during the years. The older shorter version can be used
on the TQC Automatic Film Applicator by the use of optional available lengthening rods.
7.7
Test Charts
We supply a range of test charts (TQC, Leneta® or equivalent) like:
Opacity (hiding power) charts, Opacity Display charts, Sag and levelling charts, Brush out charts,
Plain White charts or others. CERTIFIED TQC TEST CHARTS!!!
For more details go to: http://www.tqc.eu/en/products/productlistarticles/214/1/false/Test-charts
7.8
Drying Time Recorder
The TQC Automated Film Applicator can be used as a Drying Time Recorder. In order to use the TQC Automatic
Film Applicator as a Drying Time Recorder following steps need to be followed:
•
Remove the Spiral bar weight (5 from drawing chapter 7) by pulling out the Spiral bar weight guide
pins(6).
•
Take care that both Spiral bar weight guide pins (6) and Spiral bar weight guide rings (7) are stored in a
safe place. In order to not to lose them.
•
Place the optional available Drying Time Recorder Tool on the bar of the TQC Automatic Film Applicator
as illustrated in below image:
7.9
Multi Tool Platform
The ability of the TQC automated Film applicator to operate at a wide speed range not only allow for film
application and drying time tests to be conducted but also to serve as a stable platform for conducting tests like
the Pencil Hardness Test acc Wolff Wilborn (VF2377, VF2378 & VF2379), TQC Hardness Pen (SP0010) or
Grindometers (VF2110, VF2111, VF2112 & VF2113). For information on the use of these tools in combination
with the TQC Automated Film Applicator please contact your local sales representative.
