background image

 

User's Manual  l  MB-SMARC-3 UM 0100  l  © 2022, TQ-Systems GmbH 

 

Page  1 

 

1.

 

ABOUT THIS MANUAL 

1.1

 

Copyright and Licence Expenses 

Copyright protected © 2022 by TQ-Systems GmbH. 
This User's Manual may not be copied, reproduced, translated, changed or distributed, completely or partially in electronic, 

machine readable, or in any other form without the written consent of TQ-Systems GmbH. 
The drivers and utilities for the components used as well as the BIOS are subject to the copyrights of the respective 

manufacturers. The licence conditions of the respective manufacturer are to be adhered to. 
BIOS-licence expenses are paid by TQ-Systems GmbH and are included in the price. 
Licence expenses for the operating system and applications are not taken into consideration and must be calculated / declared 

separately. 
 
 

1.2

 

Registered Trademarks 

TQ-Systems GmbH aims to adhere to copyrights of all graphics and texts used in all publications, and strives to use original  

or license-free graphics and texts. 
All brand names and trademarks mentioned in this User's Manual, including those protected by a third party, unless specified 

otherwise in writing, are subjected to the specifications of the current copyright laws and the proprietary laws of the present 

registered proprietor without any limitation. One should conclude that brand and trademarks are rightly protected by a third 

party. 
 
 

1.3

 

Disclaimer 

TQ-Systems GmbH does not guarantee that the information in this User's Manual is up-to-date, correct, complete or of good 

quality. Nor does TQ-Systems GmbH assume guarantee for further usage of the information. Liability claims against TQ-Systems 

GmbH, referring to material or non-material related damages caused, due to usage or non-usage of the information given in this 
User's Manual, or due to usage of erroneous or incomplete information, are exempted, as long as there is no proven intentional 

or negligent fault of TQ-Systems GmbH. 
TQ-Systems GmbH explicitly reserves the rights to change or add to the contents of this User's Manual or parts of it without 

special notification. 
 
 

1.4

 

Imprint 

TQ-Systems GmbH 
Gut Delling, Mühlstraße 2 
D-82229 Seefeld 
 
Tel: 

+49 (0) 8153 9308–0 

Fax: 

+49 (0) 8153 9308–4223 

E-Mail: 

Info@TQ-Group

 

Web: 

TQ-Group

 

 
 

1.5

 

Service and Support 

Please visit our websit

TQ-Group

 for latest product documentation, drivers, utilities and technical support. 

 

You can register on our websit

TQ-Group

 to have access to restricted information and automatic update services. 

 

For direct technical support you can contact our FAE team by email

TQ-Support

 

Our FAE team can also support you with additional information like 3D-STEP files and confidential information, which is not 

provided on our public website. 
 

For service or RMA, please contact our service team by email (

TQ-Service

) or your sales team at TQ. 

 

Summary of Contents for MB-SMARC-3



































Reviews: