TQ MB-M10-1, User Manual

Page: 21 / 25

User's Manual l MB-M10-1 UM 0100 l © 2016 TQ-Group Page 17
7. APPENDIX
7.1 Acronyms and Definitions
The following acronyms and abbreviations are used in this document.
Table 10: Acronyms
Acronym Meaning
ATA AT Attachment
BIOS Basic Input/Output System
CPU Central Processing Unit
CSM Compatibility Support Module
DC Direct Current
DDC Display Data Channel
DDI Digital Display Interface
DDR3L DDR3 Low Voltage
DMA Direct Memory Access
DP DisplayPort
DVI Digital Visual Interface
ECC Error-Correcting Code
eDP embedded DisplayPort
EEPROM Electrically Erasable Programmable Read-Only Memory
EMC Electromagnetic Compatibility
eSATA external Serial ATA
ESD Electrostatic Discharge
FAE Field Application Engineer
FIFO First In First Out
flexiCFG Flexible Configuration
FPGA Field Programmable Gate-Array
FR-4 Flame Retardant 4
GND Ground
GPIO General Purpose Input/Output
HD High Definition
HDA High Definition Audio
HDMI High Definition Multimedia Interface
HSP Heat Spreader
I Input
I PD Input with internal Pull-Down resistor
I PU Input with internal Pull-Up resistor
I/O Input/Output
IEEE® Institute of Electrical and Electronics Engineers
IP Ingress Protection
IRQ Interrupt Request
iRTC Industrial Real Time Clock
I2C Inter-Integrated Circuit
JTAG Joint Test Action Group
LED Light Emitting Diode
LP Low-Profile
LPC Low Pin Count
LVDS Low Voltage Differential Signal