User's Manual l MB-COME6-4 UM 0100 l © 2022, TQ-Systems GmbH
Page 22
6.
SAFETY REQUIREMENTS AND PROTECTIVE REGULATIONS
6.1
EMC
The MB-COME6-4 was developed according to the requirements of electromagnetic compatibility (EMC). Depending on the
target system, anti-interference measures may still be necessary to guarantee that the limits for the overall system including
housing are met.
6.2
ESD
In order to avoid interspersion on the signal path from the input to the protection circuit in the system, the protection against
electrostatic discharge should be arranged directly at the inputs of a system. Most external interfaces are protected using ESD
protection diodes. Measurements for ESD protection have to be done with the electronic parts mounted in a housing. Since TQ-
Systems GmbH does not offer a housing for the MB-COME6-4, no special preventive measures are taken.
6.3
Operational Safety and Personal Security
Due to the occurring voltages (12 V DC), tests with respect to the operational and personal safety have not been carried out.
6.4
Reliability and Service Life
6.4.1
RoHS
The MB-COME6-4 is manufactured RoHS compliant.
•
All components and assemblies are RoHS compliant
•
The soldering processes are RoHS compliant
6.5
WEEE
®
The final distributor is responsible for compliance with the WEEE
®
regulation.
Within the scope of the technical possibilities, the MB-COME6-4 was designed to be recyclable and easy to repair.
6.6
REACH
®
The EU-chemical regulation 1907/2006 (REACH
®
regulation) stands for registration, evaluation, certification and restriction of
substances SVHC (Substances of very high concern, e.g., carcinogen, mutagen and/or persistent, bio accumulative and toxic).
Within the scope of this juridical liability, TQ-Systems GmbH meets the information duty within the supply chain with regard
to the SVHC substances, insofar as suppliers inform TQ-Systems GmbH accordingly.
6.7
EuP
The Eco Design Directive, also Energy using Products (EuP), is applicable to products for the end user with an annual quantity
>200,000. The MB-COME6-4 must therefore always be seen in conjunction with the complete device. The available standby and
sleep modes of the components on the MB-COME6-4 enable compliance with EuP requirements for the MB-COME6-4.
6.8
Battery
No batteries are assembled on the MB-COME6-4 by default. The MB-COME6-4 provides a battery socket, which can be equipped
with a CR2032, 3.0 V lithium coin cell. The MB-COME6-4 provides current limiting circuitry and protection against reverse current.
6.9
Packaging
The MB-COME6-4 is delivered in reusable packaging.
