User's Manual l MB-COME10-1 UM 0101 l © 2016 TQ-Group
Page 18
3.5.12
Fan Connectors
The MB-COME10-1 is equipped with two connectors for connecting a fan. Don’t use both connectors at the same time.
X17: 12 V fan connector
-
Connector type: Molex 47053-1000
-
Mating connector: 4-pin fan connector (2.54 mm contact spacing)
Table 17:
12 V Fan Connector X17
Illustration 15:
12 V Fan Connector X17
If a standard 3-pin 12 V – fan is connected it will run at its full speed.
X18: 5 V fan connector
-
Connector type: Molex 53398-0371
-
Mating connector: e.g. Molex 51021-0300 crimp housing
Table 18:
5 V Fan Connector X18
Illustration 16:
5 V Fan Connector X18
3.5.13
Riser Interface
The MB-COME10-1 is equipped with a card edge connector for extension purposes. Up to two PCIe cards can be connected to
this interface with adapters.
For further information about the Riser interface, please contact TQ-Systems GmbH.
Illustration 17: PCIe card Installation Configuration
Pin
Signal
Remark
1
GND
–
2
12 V
–
3
SENSE
Sense input for fan speed
4
CONTROL
Speed control output
Pin
Signal
Remark
1
SENSE
Sense input for fan speed
2
PWM_OUT
Speed control/power output
3
GND
–
