User & Installation manual
VHF- Communication Transceiver
Doc.-Nr.:
DE-3000-800100e
KRT2, KRT2M, KRT2RC
Revision 13.0
Jul. 2016
36 / 67
4.7 Resetting to factory settings
Returning to the factory settings can only be initiated during power-up.
To do this, during power-up the MEM and DUAL buttons must be pressed
simultaneously and the display will show “SET DEFAULTS”. When the
buttons are released the resetting to the factory settings takes place. When
resetting is completed “DONE” is displayed.
4.8 SET UP - Menu
During power-up the MEM button must be pressed.
The message "protect mode" is displayed, just wait until it changes.
There are two functions available within the Set-up menu:
•
ERASE
– Erasing of the favorites (frequency and identifier)
•
Channel Spacing
– 25kHz / 8,33kHz
Programming of the Set-up is done with the lower 3 buttons next to the
symbols (Exit, S, E). Their function is described on the display.
To exit the SET-UP menu, use the MEM button. The unit remains powered
and the normal operating mode is resumed.