V. Keyboard Function
:Use this key to select the unit weight
: Use this key to enter the counting mode
:This key is used for weight accumulation
: Calibration function
:memory recall ,to recall limit data from memory.
:Use this key to clear the readings entered.
:data entry key and backlight key
:Preset high and low limit value warning function; Warning
while outrun the high limit value; Warning while lower than the low
limit value; Warning while between low and high limit value;
Warning while our of low and high limit value.
:
: If there is a minor weight displayed without anything on
3
the pan ,hit the this key to clear the display
:
Use this key to subtract that the current weight readings is net weight.
VI.
Operation
(I) Backlight
Press key to choose the display backlight mode
：
1.
AUTO: “Auto Backlight” mode. When the weight is over 5
divisions, the backlight will be switched on.
2.
ON
:
Display backlight is on all the time.
3.
OFF: Display backlight is off.
(II)Calibration
Press key, put on the weight with value same as
the screen display, when the scale is stable and the buzzer
sounds ,the calibration is finished.
NOTE:
When the screen display the value of the weight,
press key for 1 second and then press ,it will
show “0- - - -- - “, then input 0-9 by , press the
key to input point, press key to figure, when the input
value flickers, put on the weight to calibration.
Press key and then press to clear the value.
Pres key for one second to exit the calibration mode.
(III)Recover the factory Set
4
