2
/5
MirageFlex
TM
Non-Waterproof Models
Instruction Manual
CONTINUED
168 Irving Ave, Suite 303C, Port Chester, NY 10573
|
PHONE
: 914.698.1141
|
FAX
: 914.305.1926
|
|
www.tprlights.com
© TPR Enterprises, LTD.
• 3M adhesive backing may not adhere properly in low temperatures or high humidity.
Operating Temp -20°F ~ 60°F. Humidity range is 40%-70%.
• MirageFlex
™
bending radius is approximately 2”.
• Store MirageFlex
™
Panels in original packaging in cool dry and flat location until ready
to install.
• There is a possibility, depending on your installation and cut pattern, you may have to solder
leads onto the panels to join panels or power them. We strongly recommend using the
connectors, however if this step is necessary, it must be connected by a technician/electrician
who has soldering experience. Severe damage can occur if not properly done and panel
failure will occur. See maximum feed through. For waterproof panels, see waterproof
instructions.
• Polarity is extremely important. Incorrect polarity will cause failure.
• Maximum number of panels that can be connected together:
SINGLE COLOR
2 watt
Using one jumper 17 panels. Using two jumpers 34 panels.
3.7 watt Using one jumper 10 panels. Using two jumpers 20 panels.
7.5 watt Using one jumper 7 panels. Using two jumpers 14 panels.
10 watt Using one jumper 5 panels. Using two jumpers 10 panels.
TUNABLE WHITE
11 watt Using one jumper 4 panels. Using two jumpers 8 panels.
16 watt Using one jumper 3 panels. Using two jumpers 6 panels.
• This product is IP20 – INDOOR USE ONLY.
• Panel is not designed for continuous flexing. This will cause failure.
• Once installed, removal will cause panel failure.
*Test all MirageFlex
™
Sheets prior to mounting and connecting together.
