General Specifications
(cont.)
RECEIVER PATH INSERTION LOSS:
1dB maximum (150-174 MHz)
HARMONIC AND SPURIOUS EMISSIONS ATTENUATION:
Models meet or exceed FCC requirements.
CONNECTORS:
S0-239 (UHF) on input and output. Cinch 4 pin
(male) DC input.
**FUSING:
If an external fuse is required, refer to the table under
General Specifications.
NOTE
This amplifier has been tuned to the frequency specified at the time
of order. Broader coverage is available, if specified at the time of
order.
CAUTION!
Check the amplifier upon receipt for visible damage. if any is no-
ticed, please call
TPL
at (800) HI-POWER for an RMA number (Re-
turned Material Authorization): If purchased through a dealer, or dis-
tributor ask them to follow this procedure for best results.
EXPENSIVE COMPONENTS MAY BE DESTROYED IF THE
AMPLIFIER IS TURNED ON IN A DAMAGED CONDITION.
TYPE ACCEPTANCE
TPL Communications
commercial amplifiers are FCC Type
Accepted for use in the Land and Marine mobile/fixed services. The
technician installing this amplifier must hold a General Radio Telephone
permit and be familiar with the pertinent FCC rules and regulations.
Harmonic and other, spurious, signals from this amplifier are attenu-
ated beyond FCC requiements. The amplifiers will stay within specifi-
cations even if de-tuning is necessary to reduce power to station im-
posed limitis .
For further details consult the appropriate publications.
Page 2
