TPCAST RX001 User Manual On Installation Download Page 19

18

not replace it with a non-TPCAST battery. Any damage caused 
accordingly willwaive the warranty of the adaptor. In order to 
mitigate the risk of fire hazard or combustion hazard, please do 
not disassemble, squeeze the portable power bank and shall not 
expose the power supply to environment exceeding 60

,  or toss 

into the fire or water.

Children use: 

Children are not allowed to use this product. Please 

keep this product in appropriate locations beyond the reach of 
children, and do not grant access to children. If elder children are 
allowed to use this product, please do proceed under the close 
watch of adults.

Recharging:

The battery can be recharged with a regular cellular 

phone charger, and a charger of 2A is recommended to reduce the 
charging period.  9~12 hours will be needed to complete a single 
full charge.  A charger of the capacity of more than 2.4A shall not 
be used for recharging.

Service and maintenance:

The adaptor is non-waterproof; 

therefore, attention should be paid to adequately protect it, 
including a blower, air duct, etc. should not be used to dry the 
product in the case it gets wet as the product may get damaged.

• Do not drop or disassemble the adapter, as it can cause an 
electrical shock or fire.
• Operate and maintain the product in an environment of 14 to 104 
degrees Fahrenheit.
• Use the product as directed only and do not connect to any 
incompatible products.
• Refer to the local regulations on disposal of electronic waste for 
proper waste management.
• Avoid inserting small objects into the products through the vent 
openings.
• Do not clean this product with any irritating chemical, detergent, 
liquid soap or aerosol.

Summary of Contents for RX001



























Reviews: