TPC PC2630, User Manual, Page: 5 / 7

Remove Waste Container:
Turn waste container counter
clockwise to remove. Clean
with running water and
disinfect with suitable
solution. Do not autoclave the
waste container!
Removal of water bottle:
Turn water bottle switch to
the off position: when the air
purge is complete, turn the
bottle counter clockwise to
remove.
Wiping the unit:
Don’t spray any chemicals
directly on the face of the
dental unit. To clean, spray a
cloth and wipe clean. Take
caution when cleaning around
the electrical outlet.
Flushing the Vacuum system :
To flush the Vacuum system,
allow the unit to reach its full
tank capacity. Once full,
submerge the Saliva Ejector
Valve in two cups of water
mixed with cleaning solution.
Allow the system to
completely vacuum the mix
through out the system. Once
complete, Flush again with
water.
Purge Valve : Press the drain
valve button “IN” on the side
of the unit. This will allow any
moisture in the tank to drain.
Operation of controls
Water Bottle Switch:
Turn this switch to the “ON”
position to pressurize the
bottle system. Turn to the
“OFF” position to depressurize
the system.
Water Flow control for HP1:
To adjust the water flow to
the HP use the adjustment
knob shown. Turn clockwise to
decrease water supply.
Counter clockwise to increase
water supply.
Water Flow control for HP2:
To adjust the water flow to
the HP use the adjustment
knob shown. Turn clockwise to
decrease water supply.
Counter clockwise to increase
water supply.
3-Way Syringe Adjustment:
Turn clockwise to decrease
pressure. Counter clockwise to
increase pressure.
Suction On/Off:
Switch to “on” position to turn
the suction system on. Turn
the switch to the “off”
position and suction will turn
off. Turn off when removing
suction waste container.
Dental Unit Foot Control:
Depress foot control to supply
air pressure to dental unit hp
tubing. The selected HP
position will begin to expel air
from the end of the tubing.