TPC NQB Series Maintenance Manual Download Page 4

Page: 4 / 4

3. How to put grease

1. Put grease in slide block nipple two times(20cc for each time) by using grease

injector, and after each injection, operate the module 3~4 cycles so that grease
can be spread widely

2. Clean outside of module after putting grease

NQB

Series

Summary of Contents for NQB Series

Page 1: ...Maintenance Manual NQB Series...

Page 2: ...NQB Series 1 Structure...

Page 3: ...leasing bolts 3 Remove an old belt and replace it with new one 2 Tension adjustment After removing a cover adjust belt tension by using tension adjustment bolt 1 Prepare a new belt 5 Re assembly tensi...

Page 4: ...ase in slide block nipple two times 20cc for each time by using grease injector and after each injection operate the module 3 4 cycles so that grease can be spread widely 2 Clean outside of module aft...