4. Installation
Step 4 : Install the eye Protector.
Step 5: Charge Lithium battery
For the best performance. Charge curing light handpiece continuously for 4 hours (charge battery at least 8
hours prior to initial use). The battery symbol on the LCD panel will show the sign of “full power” when battery
is completely charged. A flashing battery symbol indicates the battery should be recharged or user can directly
connect it to the power supply for uninterupted use.
LED 70N will detect the charging automatically. There will be one short beep tone generated when it has been
properly put on to the Charging Base.
5. Operation
A. Set Curing Program
Press and hold the function switch for two seconds and you will see the modes change every second. To stop on
the desired mode simply let go of the depressed button for the selected mode.
(1)
FAST
(2)
PULSE
(3)
RAMP
1.Curing Time
2.Battery Sign
3.Curing Program
Indications on LCD Panel
4
Fast Mode Options.
1. 2,000 mW
2. 1,500 mW
3. 1,000 mW
To select a specific output in the
fast mode press and hold the
curing switch for two seconds
to change to the desired output
mode.