TPC
Installation instruction
1.
2.
3.
Place the H6000 in a location
where you have an air line.
Generally this location will be
located near your sterilization
area. You will also need an
electrical outlet, Connect your air
line and electrical.
Fill lubrication reservoir with the
supplied lubrication fluid. Make
sure not to over fill the reservoir
or spillage will occur. After
filling, be sure to tighten the oil
reservoir cap.
Place absorbent pads into place.
These pads will absorb any
excess lubrication that is
released in the chamber. The
pads need to be replaced every
tank cycle.
