TPA CN2008 SE, Documentation

Page: 7 / 22

Functional specification
eCN2008SE
7
2 FUNCTIONAL SPECIFICATION
2.1 General requirements
General requirements of the device are as follows:

based on an embedded small-sized PC architecture.

Mounting on DIN Rail (with both high and low profile).

The basic configuration includes 1 TMSBus or TMSCAN expansion board.

This system permits the expandability thanks to an additional PC104 board
homologated by TPA.

All the connections are displayed on the front side.

Connection with PC supervisor through Ethernet 10/100/1000 Mb/s.

Windows CE Operating System

Serigraphics indications

24 V external power supply.

Fanless system
2.2 Control specifications

based on a 3.5
”
MPU with 1GHz processor.

RAM DDR3 1066MHz, 1GByte (or higher).

Flash: 512MByte (or higher).

Fanless board

n°.1 VGA output for monitor.

n°.1 PS/2 I/F for mouse + keyboard.

no.1 serial RS232

n°.1 serial RS485 (RS422 configurable by request).

n°.1 LAN Ethernet 10/100/1000 Mb/s for connection to PC supervisor.

n°.1 LAN Ethernet for EtherCAT bus.
2.3 Expansion specific boards

PC104 standard format

Dedicated panel

Front connectors.

TPA's approval on expansion board.