TP Toys Salcombe TP372 Instructions For Assembly, Maintenance And Safe Use Download Page 2

Instructions for assembly, maintenance and safe use. 

Please retain this information for future reference.

1.  Toys must be assembled by an adult before use exactly in accordance with the instructions.

2.  Check all parts are present before you start to assemble the product.

3.  Place small parts on a tray or similar, to ensure they are not lost.

4.  If any parts are missing do not use the product until the replacement parts are fitted.

5.  Remove all packaging before giving to your children or allowing them to play with this 

product.

6.  Ensure your product is sited on level ground. Failure to do this may put additional stress on 

connections and joints and in time could cause them to fail.

7.  Ensure your product is located on a soft impact surface like grass. Never locate your 

product on hard surfaces like concrete or asphalt.

8.  Children must not use this product until properly installed.

9.  Adult supervision is required at all times to ensure children play safely. Ensure children’s 

clothing is appropriate for the play activity. 

10.  Equipment should be checked by an adult at the beginning of each season and at regular 

intervals during the usage season  to ensure it is safe.

11.  Pay special attention to all connections and fastenings. 

12.  Parts may need to be replaced if they show signs of wear and tear. Replace any defective 

parts in accordance with these instructions.

13.  Any changes to this toy, e.g. changing or adding an accessory, must be done in accordance 

with our instructions. Failure to do this will render your guarantee null and void and may 

make your product unsafe.

14.  The age recommendation for this product is clearly stated on the packaging and these 

instructions. Please adhere to it at all times.

15.  When you dispose of this equipment please do so responsibly.

16.  Never place toys near a fire.

Consignes d’assemblage, d’entretien et d’utilisation pour 

éviter le danger. 

Veuillez conserver ces informations afin de pouvoir vous y 

référer plus tard.

1.  Les jeux doivent être assemblés par un adulte conformément aux consignes.

2.  Ce produit ne doit pas être utilisé par des enfants tant qu’il n’est pas installé correctement

3.  Vérifier que toutes les pièces sont présentes avant de commencer à assembler le 

produit. Placer les petites pièces sur un plateau ou autre pour veiller à ne pas les perdre. 

Le processus de fabrication peut, en de très rares occasions, engendrer des rebords 

tranchants/déchets ; il est donc nécessaire de faire attention au moment de l’assemblage 

de ce produit

4.  S’il manque une pièce, ne pas utiliser le produit jusqu’à l’installation de la pièce de 

substitution

5.  Veiller à installer le produit sur une surface plane. Sinon, cela risque d’exercer une pression 

trop importante sur les attaches et les jointures et de provoquer une chute au bout de 

quelque temps.

6.  6.  Veiller à ce que le produit soit situé sur une surface molle, comme de l’herbe. Never 

locate your product on a hard surfaces like concrete .

7.  Éviter de placer ce produit en plein soleil.

8.  En cas d’usure, certaines pièces pourraient avoir à être remplacées. Remplacer toute pièce 

défectueuse conformément à ces consignes

9.  En raison des caractéristiques naturelles du bois, il est essentiel de vérifier la structure du 

jeu régulièrement afin de s’assurer qu’il n’y ait pas d’éclats et que les couches supérieures 

ne se soulèvent pas ou que le bois brut ne soit pas exposé. Les zones touchées doivent être 

frottées avec du papier de verre à grain élevé afin de recréer une surface lisse et sûre

10.  Veiller à ce que les vêtements de l’enfant soient appropriés pour jouer.

11.  Lorsqu’il y a du vent, veiller à ce que les jouets soient placés à l’abri ou bien attachés au 

sol.

12.  L’âge recommandé pour utiliser ce produit est indiqué clairement sur l’emballage et dans 

ces consignes. Veiller à les respecter à tout moment.  La surveillance d’un adulte est 

requise à tout moment pour garantir que les enfants jouent en toute sécurité.  

13.  Jeter cet équipement de manière responsable.

WARNINGS!

ATTENTION!

•  THIS PRODUCT CONTAINS SMALL PARTS AND IS NOT SUITABLE FOR CHILDREN UNDER 36 MONTHS.  

SMALL PARTS ARE A CHOKING HAZARD.

•  ONLY FOR DOMESTIC USE. FOR OUTDOOR USE ONLY.

•  TOY MUST BE ASSEMBLED BY AN ADULT BEFORE USE.

•  ADULT SUPERVISION REQUIRED.

•  CHILDREN MUST NOT USE THIS PRODUCT UNTIL PROPERLY INSTALLED.

•  REMOVE ALL PACKAGING BEFORE GIVING TO YOUR CHILDREN.

•  THIS PRODUCT IS INTENDED FOR USE BY CHILDREN AGED 3+ YEARS.

•  TOTAL COMBINED MAXIMUM USER WEIGHT FOR THIS PRODUCT 150KGS.

•  RETAIN PACKAGING FOR FUTURE REFERENCE.

•  CE PRODUIT CONTIENT DES PIÈCES DE PETITE TAILLE ET N’EST PAS ADAPTÉ AUX ENFANTS DE 

MOINS DE 36 MOIS . RISQUE D’ÉTOUFFEMENT - PIÈCES DE PETITE TAILLE.

•  RÉSERVÉ À UN USAGE DOMESTIQUE. POUR UNE UTILISATION À L’EXTÉRIEUR SEULEMEN.

•  AVANT USAGE, LE JOUET DOIT ÊTRE ASSEMBLÉ PAR UN ADULTE CONFORMÉMENT AUX CONSIGNES.

•  À UTILISER SOUS LA SURVEILLANCE D’UN ADULTE.

•  CE PRODUIT NE DOIT PAS ÊTRE UTILISÉ PAR DES ENFANTS TANT QU’IL N’EST PAS INSTALLÉ 

CORRECTEMENT

•  RETIRER TOUT L’EMBALLAGE AVANT DE DONNER CE PRODUIT À SON ENFANT OU AVANT    

DE L’AUTORISER À JOUER AVEC

•  CE PRODUIT EST CONÇU POUR LES ENFANTS ÂGÉS DE 3 + ANS.

•  CONSERVER L’EMBALLAGE ET LE MODE D’EMPLOI POUR TOUTE RÉFÉRENCE ULTÉRIEURE.

EN

FR

TP370 Loft House In0370-C 31.01.22.indd   2

TP370 Loft House In0370-C 31.01.22.indd   2

31/01/2022   12:07

31/01/2022   12:07

Summary of Contents for Salcombe TP372

















































Reviews: