20
English
T1. How do I restore my AP’s configuration to its factory default
settings?
With the AP powered on, press and
hold the
RESET
button for about 8
seconds before releasing it.
T2. What can I do if I forget my password?
1) Restore the AP’s configuration to its factory default settings. If you
don’t
know how to do that, please refer to previous section
T1
;
2) Use the default user name and password:
admin
,
admin
;
3) Try to reconfigure your AP by following the instructions of this QIG.
T3. What can I do if I cannot access the web-based configuration
page?
You should first configure your computer’s IP Address.
Please follow the steps below to finish your PC configuration.
¾
For Windows 7 OS
Go to
Start > Settings > Control
Panel
, and then you will see the
following page.
Appendix 2:
Troubleshooting
Hold it in for about 8 seconds
You will need to assign your computer a
Static IP address
within
the same range as the AP’s IP address. See the
Appendix 2:
Troubleshooting -
T3
if you need assistance.
Note
Click
View network
status and tasks
