8
Note: The default IP address of MFP server is 192.168.0.10, and subnet mask
is 255.255.255.0. If the MFP server utility didn’t find MFP server, please make
sure of the MFP server and your computer’s IP segment are the same, e.g.
192.168.0.xxx.
17 Click the “+” in front of the MFP server name to show the name of the attached
printer. Then select the printer name and click the Connect button in the MFP
server utility.
18 The printer should be detected as if it was plugged directly into the computer.
Finish any remaining setup needed by the printer software. Your MFP printer
should be ready to use.
19 If you would like the connection to this printer to be restored automatically when
the MFP server utility launches, you will need to add the device to your favorites
list. Click the “+” in front of
Connected devices
and right-click the name of the
printer. Choose
Add to favorites
from the menu that pop-up menu.
