TD-W8900GB
54M Wireless ADSL2+ Router User Guide
19
Figure 5-3
¾
WAN Port Information Table:
This table describes the WAN port settings and the relevant
manipulation to each interface.
¾
Remove:
Select the check box in the table (shown in Figure 5-3) and then click the
Remove
tab, the corresponding interface will be deleted in the table.
¾
Add:
Click the
Add
button, you can add a new interface in the next screen (shown in Figure
5-4).
¾
Save/Reboot:
If you are sure of the settings, choose
Save/Reboot
to apply the changes and
reboot the system.
)
Note:
You have to reboot to activate the WAN interface and further configuration services over this
interface. Click the
Save/Reboot
button to implement it.
Follow the instructions below to Add or Edit an ATM PVC
1. Click
the
Add
button on the screen above (shown in Figure 5-3), then you will see the next
screen as follows (Figure 5-4):
