background image

 

splitter to the ADSL port on the Modem Router, also have the PHONE port 
on the splitter connected to a telephone. 

  Connect your telephone to the port labeled “PHONE 1~2” on the Modem 

Router with a telephone line. 

  Connect your USB device to the USB port labeled “USB” on the Modem 

Router. 

 

 
 

 
 

 Plug the provided Power Adapter into the Power jack on the back of the 

Modem Router and the other end to a standard electrical wall socket. 

  Switch on the ON/OFF button and power on all your other network devices. 

Then check to see if the LEDs of the Modem Router display normally as the 
diagram below describes. 

 

 

 

 

 

 

 

 

 

 

If the LEDs display abnormally, please check to see if all the cable
connectors (power adapter, phone line Ethernet cable and USB device) 
are well connected to your device. With the phone line well connected, if
the ADSL LED turns off after flashing, please contact your ISP to ensure 
that your Internet connection is active. 

Note 

WLAN: Solid 
light or flashing

Note 

1. If you want to share files or use the USB Voice Mail function, please plug

an external USB hard drive/USB flash disk into the USB port. To use the 
printer function, please connect a USB printer to the USB port. 

USB: Solid 
light or flashing

LAN: Solid light 
or flashing 

ADSL: Solid 
light or flashing

Power: Solid 
light 

2. To use USB Voice Mail function, please make sure the free space of the

plugged external USB hard drive/USB flash disk is more than 4MB. 

Summary of Contents for TD-VG3511






















Reviews: