TP-Link TD-8840, User Manual

Page: 8 / 25

TD-8840 External ADSL2+ Router User Guide
manufacturer’s setup.
¾ 1~4(LAN) : Connect with your computer’s NIC.
¾ LINE(WAN) : Connect to the MODEM Port of Splitter or Connecting the telephone
line.
2.4 Hardware installation procedures
（
figure2-1
）
The procedure to install the Router can be described in general terms in the
following steps:
First Step : Connecting the MODEM port of Splitter with the TD-8840 ADSL2+ ROUTER
LINE port by telephone line. While you need to use a telephone, please attach telephone
line into the phone of Splitter.
Second Step : Connect category 5 cable with RJ45 jacks to the ADSL2+ ROUTER’s
LAN port and your computer’s NIC.
Third Step : Plug one end of the AC Power Adapter into the Power jack on the Ethernet
ADSL2+ ROUTER and the other end to a standard electrical outlet.
Last Step : Check the line connection to see if everything is ready. Power up finally.
（
Figure2-1
）
- 6 -