background image

Entertainment Adapter

The extender can be used as a wireless adapter to connect any Ethernet-only 
device (such as a Blu-ray player, game console, DVR, or smart TV) to your Wi-Fi 
network.
First, connect the extender to your router using 

Option ONE

 or 

Option TWO

, then 

connect the extender to your Ethernet-only device via an Ethernet cable.

Connect

2

Press the 

WPS 

button on your router, and then press the        button on the extender.

1

The          LED should change 
from blinking to a solid state,  
indicating a successful WPS 
connection.
If not, please use Option ONE.

WPS

If you are connecting to a dual-band router, but only        or       LED is 
on, please repeat step     to reconnect the other band.

1

Press

Some ISP gateways disable the WPS function by default, if the WPS method fails, please use Option ONE.

Option TWO

Please use Option ONE if your router does not support WPS.

Using WPS (Wi-Fi Protected Setup)

Both 2.4GHz and 5GHz extended networks share the same SSID (network name) and password as your host network.

Enjoy!

1

2

Plug the extender into an electrical outlet 
near your router, and wait until the 

Power

 

LED

 is lit and solid blue.

Power On

3

Relocate

A1. Make sure your computer is connected to the extended network SSID or connect your 

computer to the extender using an Ethernet cable.
A2. Make sure your computer is set to obtain an IP address automatically.
A3. Verify that 

http://tplinkrepeater.net

 is correctly entered in the web browser and press

 Enter

.

Q3. What should I do if the        LED does not change to solid after completing 

Option ONE?

Frequently Asked Questions (FAQ)

Q4. How do I restore the extender to its factory default settings?

A. While the extender is powered on, press and hold the 

Reset

 button until all the LEDs turn on 

momentarily.

Q2. What should I do when I cannot connect the extender via WPS?

A. Some dual-band routers may be trouble connecting to the extender via WPS. If you experience 

connection issues, we recommend that you use the extender's web-based interface.

A1. You may have entered the incorrect Wi-Fi password of your host network during the 

configuration. Please log into the extender's web-based interface to check the password and try 

again.
A2. Please reset the extender and go through the configuration again.

Q1. What do I do if I cannot access the extender’s web-based interface?

Smart TV

Game Console

Desktop

Router

Choose a location away from Bluetooth devices 
and other household electronics, such as cordless 
phone, microwave, and baby monitor, etc., to 
minimize signal interference.

Keep away from

Ideal Extender Placement

Host Network

Extended Network

Red: Too far away

Blue: Ideal location

Plug the extender into an electrical outlet about 

halfway

 between your router (Host Network) and the 

Wi-Fi dead zone.
Wait until the        LED is lit with a solid blue. If not, 

relocate the extender closer to the router

 to 

achieve a good (or better) signal quality.

1

2

Reviews: