PW-AN401/PW-AN401D
150M Wireless N Access Point User Guide
50
Figure 4-20 Wireless MAC address Filtering
The Wireless MAC Address Filtering feature allows you to control wireless stations accessing the
device, which depend on the station's MAC addresses.
¾
Wireless MAC Filtering -
Click the
Enable
button to enable the Wireless MAC Address
Filtering. The default setting is disabled.
To Add a Wireless MAC Address filtering entry, click the
Add New…
button. The “Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-21
Figure 4-21 Add or Modify Wireless MAC Address Filtering entry
¾
MAC Address
-
Enter the wireless station's MAC address that you want to control.
¾
Description -
Give a simple description of the wireless station.
¾
Status
-
Select a status for this entry, either
Enabled
or
Disabled
.
To set up an entry, follow these instructions:
First, you must decide whether the unspecified wireless stations can access the device or not. If
you desire that the unspecified wireless stations can access the device, please select the radio
button
Deny the stations specified by any enabled entries in the list to access
, otherwise,
select the radio button
Allow the stations specified by any enabled entries in the list to
access
.
