background image

 

 

1 Product Introduction 

1.1  Brief Introduction 

TP-Link presents the industry's leading GPON solution of P1200-08, which complies with the 
relevant standards of ITU G.984.x and FSAN. P1200-08 is 1U Rack mount equipment, 8pon 
ports, 8 GE uplink optic ports, 8 GE uplink electric ports. The maximum optical coupling ratio 
of 1:128, up to 1024 GPON ONTs. The down link band width is 2.5Gbps and uplink bandwidth 
is  1.25Gbps.  The  product  is  in  compact  design  and  convenient  for  flexible  using,  easy  to 
deploy with high performance. It can meet the requirements of equipment performance and 
compact volume of the room environment. It can also satisfy the requirements of the access 
network and enterprise network that enhancing the network function, improving the reliability 
and  reducing  power  consumption.  The  product  is  suitable  for  the  "triple  play"  service,  the 
resident  of  optical  access  network,  video  surveillance  network,  enterprise  network  and  the 
Internet of the network applications. 

 

Figure 1-1 P1200-08 in GPON system 

1.2  Functional Features 

Comply  with  ITU-T  G.984/G.988  standards  and  China's  Telecom  industry  GPON 
standards. 

Support  OMCI  remote  management  of  ONT/ONT,  compatible  with  ITU-984.4  OMCI 
protocol. 

Standalone 1U 8PON compact design of OLT products 

P1200-08 provides 8 GPON ports, 8 uplink GE optical ports + 8 uplink GE electric ports, 10 
Gigabit card expansion slot provides 2*10Gigabit SFP+ uplink port. Each PON port supports 
128 ONT, total 1024 ONT for one chassis. Support dual power supply redundancy, 220VAC 
and -48VDC mixed. 

The complete layer 2 switching function 

OLT is with powerful layer 2 switching capacity and complete layer 2 protocol. Supporting with 
the exchange, isolation and One By One working mode. Supporting port aggregation, VLAN, 
port  speed,  queue  technology,  flow  control  technology  and  ACL  rich  two  layer  function. 
Offering the technical support for the development of the multi-service fusion. 

The QOS security 

GPON  products  is  with  complete  DBA  function  and  excellent  ability  of  QoS  service.  DBA 
provides a variety of QoS for the GPON system by means of four types of bandwidth and five 

Summary of Contents for P1200-08
















Reviews: