TP-Link neffos N1, User Manual

Page: 20 / 96

14 Chapter 2
Basics
2. 8 Configure your fingerprint
Use the fingerprint sensor to unlock the screen, take photos and unlock apps.
Add a fingerprint for the first time
For added security and to ensure that you can still access your data if your phone fails to recognize your
fingerprint, you will need to set a backup screen lock method when configuring fingerprint unlock.
1. Go to
Settings
->
Screen lock, fingerprint & security
->
Fingerprint management
.
2. Select
Pattern
or
PIN
or
Password
, and then follow the onscreen instructions to set a screen lock
password.
3. Once you have configured the password, tap
Add fingerprint
.
4. Place your fingertip on the fingerprint sensor. Press down lightly on the sensor until your phone vibrates.
Repeat this step using different parts of your fingertip until your phone has successfully added your
fingerprint.
5. Once you have added your fingerprint, tap
DONE
.
Note:
1. When recording your fingerprint, make sure the fingerprint sensor and your fingers are dry and clean.
2. For more security settings, see
Screen lock, fingerprint & security .
Add, delete or rename your fingerprint
Add multiple fingerprints to make it easier to unlock your phone. You can also delete or rename your fingerprints.
1. Go to
Settings
->
Screen lock, fingerprint & security
->
Fingerprint management
.
2. Enter the screen lock pattern/password/PIN.
3. In the Fingerprint list section, you can:
• Add a fingerprint: Tap
Add fingerprint
to add a new fingerprint. You can add up to five in total.
• Rename/delete a fingerprint: Tap a previously added fingerprint to rename or tap to delete it.
4. After you enter several fingerprint, there is a list showing all the recorded fingerprint. When you place your
fingertip on the fingerprint sensor, the corresponding place turns grey, which helps you easily find the
fingerprint.
Use fingerprint to take photos or record videos
When using the camera, touch the fingerprint sensor to take a picture or record a video.
If you don’t want to use this function:
• Go to
Settings
->
Screen lock, fingerprint & security
->
Press and hold your fingerprint to capture
,
and turn off the switch to disable the function.
• Go to Camera, swipe right and tap , then switch off
Press and hold your fingerprint to capture
.
Use fingerprint to access locked applications
Use a Pattern, PIN, Password or fingerprint to lock the selected app(s) to ensure privacy.
1. Go to
Settings
->
Screen lock, fingerprint & security
->
App lock
.
2. Use fingerprints or enter the password.
3. Turn on the switch to enable the app lock for the app you want to lock.